{"title":"RATCHET STRAPS","description":"\u003cp\u003eRatchet straps lock a load to your flatbed fast. Crank the handle, the webbing tightens, and the ratchet holds tension for the whole run. Most flatbed drivers run the 2\" x 30' strap at 3,333 lb WLL for general freight, and step up to the 4\" x 30' at 5,400 lb WLL when the load is heavy or the DOT count calls for it. A 1\" x 10' strap handles light loads. Pick flat-hook, wire-hook or S-hook ends to match your stake pockets and rails, or an e-track ratchet strap with e-fittings for van and enclosed-trailer rails. Every strap carries a marked working load limit, so you can size it to the weight you're hauling and stay legal at the scale. Running webbing over a sharp edge? Add plastic corner protectors so it lasts. Need the winch-mounted version? See Winch Straps.\u003c\/p\u003e","products":[{"product_id":"2-ratchet-strap-with-flat-hook","title":"2\" x 30' Ratchet Strap with Flat Hook — Flatbed Tie-Down, 3,333 WLL","description":"\u003cp\u003eA 2-inch ratchet strap covers the everyday flatbed loads that don't need a full 4-inch strap. Hook the flat end into a side rail or stake pocket, run the webbing over the load, and crank the ratchet until it sits tight. The wide handle gives you leverage without a cheater bar, and the gold-chromate ratchet keeps turning freely after a winter of road salt.\u003c\/p\u003e\u003cp\u003eDrivers reach for the 2-inch strap when the freight is lighter and they want more tie-down points across the deck without the bulk of 4-inch webbing. The polyester holds tension under road vibration instead of stretching the way nylon does on a long haul. Inspect the webbing and hook before every trip, and replace the strap if you find cuts, fraying, or a bent hook. Keep a mixed set of 2-inch and 4-inch straps on hand for loads that vary in weight.\u003c\/p\u003e","brand":"CARGO CONTROL CENTER","offers":[{"title":"Default Title","offer_id":44452622893303,"sku":"RS230-CC","price":10.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/0246\/3479\/files\/2-ratchet-strap-with-flat-hook_1_5829addd-f653-489d-b437-99946a576abc.webp?v=1783040347"},{"product_id":"5-400-lbs-4-x-30-ratchet-strap","title":"4\" x 30' Ratchet Strap with Flat Hook — Flatbed Tie-Down, 5,400 WLL","description":"\u003cp\u003eA 4-inch ratchet strap is the workhorse for heavy flatbed freight. The wider webbing spreads the clamping force across the load, and the 5,400 lb Working Load Limit covers machinery, coils, and banded lumber that a 2-inch strap isn't rated for. Hook the flat end into the side rail, throw the webbing over the load, and ratchet it down until it sits tight.\u003c\/p\u003e\u003cp\u003eThis is the strap most flatbedders run as their main tie-down on heavier loads. Match the number of straps to the weight and the securement rules for the freight you haul, and keep the Working Load Limit tag legible for DOT inspections. Inspect the webbing and hook before every trip and retire any strap with cuts, fraying, or a bent hook. A 5,400 lb strap covers most single-axle machinery and coil freight without doubling up.\u003c\/p\u003e","brand":"CARGO CONTROL CENTER","offers":[{"title":"Default Title","offer_id":44452626333943,"sku":"RS430-CC","price":29.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/0246\/3479\/files\/5-400-lbs-4-x-30-ratchet-strap_1_a8341169-bb43-4d04-b657-c75a4a17845f.webp?v=1783040348"},{"product_id":"1-x-10-ratchet-strap-with-s-hook","title":"1\" x 10' Ratchet Strap with S Hook — Light-Duty Tie-Down, 500 lb WLL","description":"\u003cp\u003eA 1-inch ratchet strap for the light-duty tie-downs that a 2-inch strap is overkill for. The red webbing runs 10 feet and ends in S hooks that drop into rope rings, stake pockets, and anchor points. Each strap is labeled with its 500 lb Working Load Limit, so it meets DOT rules and WSTDA guidelines out of the box.\u003c\/p\u003e\u003cp\u003eUse it to hold down small equipment, furniture, appliances, and light loads on trailers, truck beds, and in vans. Keep a few in the cab for the jobs that don't need heavy webbing. Check the strap and hooks before each load and replace any strap with cuts or frays, since the light-duty rating leaves less margin than a heavier strap built for freight.\u003c\/p\u003e","brand":"CARGO CONTROL CENTER","offers":[{"title":"Default Title","offer_id":44452631576823,"sku":"RS110-CC","price":3.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/0246\/3479\/files\/1-x-10-ratchet-strap-with-s-hook_1_b279b716-a25b-4b75-89ff-669015b4f390.webp?v=1783040386"},{"product_id":"e-track-ratchet-strap-2-in-x-20-ft","title":"2\" x 20' E-Track Ratchet Strap — E-Fitting Both Ends","description":"\u003cp\u003eA full-length e-track ratchet strap for jobs that need extra reach. E-fitting ends lock into any standard e-track slot on either side, so you can anchor the strap anywhere along horizontal or vertical rail without extra hardware. The ratchet pulls the load tight and holds it under tension at a 1,333 lb Working Load Limit.\u003c\/p\u003e\u003cp\u003eReach for the 20 ft length on longer loads or wider enclosed trailers where a 12 ft or 16 ft strap runs out of webbing. Position each e-fitting anywhere along the rail to build a tie-down point exactly where the load needs it. Inspect the webbing and both fittings before each load, and confirm each e-fitting seats fully before applying tension.\u003c\/p\u003e","brand":"CARGO CONTROL CENTER","offers":[{"title":"Default Title","offer_id":49142170124535,"sku":"ETKRS220-CC","price":6.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/0246\/3479\/files\/E-track3.webp?v=1783122274"},{"product_id":"e-track-ratchet-strap-e-fitting-wire-hook-2-in-x-16-ft","title":"2\" x 16' E-Track Ratchet Strap with E-Fitting and Wire Hook","description":"\u003cp\u003eAn e-track ratchet strap for enclosed trailers, box trucks, and cargo vans fitted with e-track rail. The e-fitting locks into any standard e-track slot, and the wire hook on the other end catches a D-ring, rope ring, or a second anchor point. The ratchet pulls the load tight against the wall or deck at a 1,333 lb Working Load Limit.\u003c\/p\u003e\u003cp\u003eUse e-track straps to lock down furniture, appliances, boxes, and palletized freight inside moving trucks and enclosed trailers. Position the fitting anywhere along the rail to build a tie-down point exactly where the load needs it. Inspect the webbing, fitting, and hook before each load, and confirm the e-fitting is fully seated in the rail slot before tensioning.\u003c\/p\u003e","brand":"CARGO CONTROL CENTER","offers":[{"title":"Default Title","offer_id":49142171402487,"sku":"ETKRS16EJ-CC","price":10.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/0246\/3479\/files\/E-track_wire_1_1.webp?v=1783142021"},{"product_id":"ratchet-strap-2-in-x-30-ft-wire","title":"2\" x 30' Ratchet Strap with Wire Hook — Tie-Down Strap, 3,333 WLL","description":"\u003cp\u003eA 2-inch ratchet strap with double wire hooks instead of flat hooks. The 90-degree wire hooks clip into D-rings, O-rings, tie-down plates, and stake pockets, so you can anchor to hardware where a flat hook has nothing to catch. Hook both ends, run the webbing over the load, and crank the ratchet tight at a 3,333 lb Working Load Limit.\u003c\/p\u003e\u003cp\u003ePick the wire hook when your trailer has D-rings or recessed anchor points rather than an open rub rail. The polyester holds tension under road vibration instead of stretching like nylon. Inspect the webbing and hooks before every trip and replace the strap if the webbing is cut or frayed or a hook is bent or opened up, since a straightened hook can slip loose under load.\u003c\/p\u003e","brand":"CARGO CONTROL CENTER","offers":[{"title":"Default Title","offer_id":49453771358455,"sku":"RS230WH-CC","price":9.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/0246\/3479\/files\/ratchet-strap-2-in-x-30-ft-wire_1_171c9e2d-af09-4cdf-8b53-89c8e60e4b9c.webp?v=1783040385"},{"product_id":"ratchet-strap-4-in-x-30-ft-wire","title":"4\" x 30' Ratchet Strap with Wire Hook — Tie-Down Strap, 5,400 WLL","description":"\u003cp\u003eA 4-inch ratchet strap with double wire hooks, built for heavy loads that need a ring or plate connection instead of a flat-hook rail. The 90-degree steel wire hooks grab D-rings, O-rings, and tie-down plates and hold without twisting. Hook both ends, throw the webbing over, and ratchet it down to a 5,400 lb Working Load Limit.\u003c\/p\u003e\u003cp\u003eRun this strap on heavier freight secured to D-rings or tie-down plates rather than an open side rail. Match the number of straps to the load weight and the securement rules for what you haul, and keep the Working Load Limit tag legible for DOT inspections. Inspect the webbing and hooks before every trip and retire the strap if the webbing is cut or frayed or a hook is bent, especially on the heavier freight this strap is rated for.\u003c\/p\u003e","brand":"CARGO CONTROL CENTER","offers":[{"title":"Default Title","offer_id":49453918191863,"sku":"RS430WH-CC","price":33.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/0246\/3479\/files\/ratchet-strap-4-in-x-30-ft-wire_1_b6329573-ebc4-44ca-8b3c-dbf8c7014412.webp?v=1783040385"}],"url":"https:\/\/cargocontrolcenter.com\/collections\/ratchet-straps.oembed","provider":"CARGO CONTROL CENTER","version":"1.0","type":"link"}