{"title":"WINCH STRAPS","description":"\u003cp\u003eA winch strap feeds onto the winch on your flatbed rail, so you tension it with a winch bar instead of a ratchet handle. That is the standard setup for over-the-road flatbed loads. This range runs 2\" and 4\" wide in 30 ft and 40 ft lengths, up to 5,400 lb WLL. Choose flat-hook, wire-hook or chain-anchor ends. The chain-anchor version drops straight into a stake pocket or rub rail with no hook, which speeds up throwing straps on a long load. Every strap carries a marked working load limit for DOT compliance. Roll them up clean between loads with a strap winder, and keep the webbing off sharp corners with plastic corner protectors. Want the ratchet-handle version instead? See Ratchet Straps.\u003c\/p\u003e","products":[{"product_id":"4-winch-strap-with-flat-hook-wll-5400-flatbed-tie-down-strap","title":"4\" x 30' Winch Strap with Flat Hook — Flatbed Tie-Down, 5,400 lb WLL","description":"\u003cp\u003eA winch strap tensions differently than a ratchet strap. Instead of a lever-and-pawl mechanism built into the strap itself, you thread the loose end through a trailer-mounted winch and crank it tight, then lock the winch in place. Truckers who haul the same route with a mounted winch on their trailer prefer this style because the winch does the heavy pulling and the strap stays lighter and easier to coil.\u003c\/p\u003e\u003cp\u003eThe webbing is polyester, not nylon, so it holds tension under vibration and does not stretch the way nylon does over a long haul. Inspect the stitching at both ends before each trip and confirm the hook seats fully in the stake pocket before you start winching down. A winch bar helps when the winch handle is stiff or rusted. If your trailer does not already have mounted winches, reach for a ratchet strap instead, since this style depends on hardware already bolted to the trailer.\u003c\/p\u003e","brand":"CARGO CONTROL CENTER","offers":[{"title":"Default Title","offer_id":44452621320439,"sku":"WS430-CC","price":10.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/0246\/3479\/files\/4-winch-strap-with-flat-hook-wll-5400-flatbed-tie-down-strap_1_a23fa5eb-139a-46ba-88c1-fcc97ff43c14.webp?v=1783040347"},{"product_id":"5-400-lbs-4x-40-strap","title":"4\" x 40' Winch Strap with Flat Hook — Flatbed Tie-Down, 5,400 WLL","description":"\u003cp\u003eA 4-inch winch strap with 40 feet of webbing covers the long, oversized flatbed loads that a standard 30-foot strap comes up short on. Thread the loose end through the trailer winch and crank it down; the extra ten feet reaches across wide loads and still leaves tail to lock off. The webbing is polyester, weather-resistant, and rated to a 5,400 lb Working Load Limit with a 16,200 lb breaking strength.\u003c\/p\u003e\u003cp\u003eReach for the 40-foot length on machinery, lumber, and other wide freight where a 30-foot strap barely makes it across. Your trailer needs mounted winches to tension this strap; without them, a ratchet strap does the job instead. Inspect the webbing and hook before every trip and retire the strap if you find cuts, fraying, or a bent hook, since a compromised strap loses strength well before it visibly fails.\u003c\/p\u003e","brand":"CARGO CONTROL CENTER","offers":[{"title":"Default Title","offer_id":44452625940727,"sku":"WS440-CC","price":13.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/0246\/3479\/files\/5-400-lbs-4x-40-strap_1_173f3b71-cfb8-4f0b-a7d3-42418b8e8062.webp?v=1783040349"},{"product_id":"winch-strap-chain-anchor-4-in-x-30-ft","title":"4\" x 30' Winch Strap with Chain Anchor — Flatbed Tie-Down, 5,400 WLL","description":"\u003cp\u003eA 4-inch winch strap with a chain anchor on the fixed end. The chain wraps around a beam, cross-member, or frame rail and hooks back on itself, so you can anchor to points where a flat or wire hook has nothing to grab. Thread the free end through the trailer winch and crank it down until the load holds steady at 5,400 lbs Working Load Limit.\u003c\/p\u003e\u003cp\u003eUse the chain anchor when you're securing to equipment frames or trailer points that a hook can't catch. Your trailer needs a mounted winch to tension the strap. Inspect the webbing, chain, and hook before every trip and retire the strap if the webbing is cut or frayed or the hardware is bent or cracked, since chain links wear at contact points over repeated use.\u003c\/p\u003e","brand":"CARGO CONTROL CENTER","offers":[{"title":"Default Title","offer_id":49142282682615,"sku":"WS430C-CC","price":16.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/0246\/3479\/files\/winch-strap-chain-anchor-4-in-x-30-ft_1_13a337a1-534a-448d-b46c-e7813634893f.webp?v=1783040385"},{"product_id":"winch-strap-wire-hook-4-in-x-30-ft","title":"4\" x 30' Winch Strap with Wire Hook — Flatbed Tie-Down, 5,400 WLL","description":"\u003cp\u003eA 4-inch winch strap with a wire hook instead of a flat hook. The narrow 40Cr steel wire hook slips into recessed anchor points and rope rings that a wide flat hook can't reach, which makes it the choice for trailers without an open side rail. Thread the strap through the winch and crank it tight; the webbing carries the same 5,400 lb Working Load Limit as our flat-hook version.\u003c\/p\u003e\u003cp\u003ePick the wire hook when your anchor points are pockets or rings rather than a flat rub rail. Your trailer needs a mounted winch to tension the strap. Inspect the webbing and the hook before every load and replace the strap if the webbing is cut or frayed or the hook is bent or opened up, since a deformed wire hook can slip out under tension.\u003c\/p\u003e","brand":"CARGO CONTROL CENTER","offers":[{"title":"Default Title","offer_id":49142286778615,"sku":"WS430WH-CC","price":10.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/0246\/3479\/files\/winch-strap-wire-hook-4-in-x-30-ft_1_41fef9a0-fd02-420d-a324-7fc8c8db1d8a.webp?v=1783040386"},{"product_id":"winch-strap-2-in-x-30-ft","title":"2\" x 30' Winch Strap with Flat Hook — Flatbed Tie-Down, 3,333 WLL","description":"\u003cp\u003eA 2-inch winch strap threads through a trailer-mounted winch instead of a built-in ratchet. Feed the loose end onto the winch drum, crank it tight with a winch bar, and the winch holds the tension. The 2-inch width suits lighter flatbed freight where you want several straps across the deck without the bulk of 4-inch webbing, rated to a 3,333 lb Working Load Limit.\u003c\/p\u003e\u003cp\u003eRun this strap when your trailer already has mounted winches along the rail. If it doesn't, a ratchet strap is the better pick, since the winch strap depends on that hardware to tension. Check the webbing and hook before each load and replace the strap if the webbing is cut or frayed or the hook is bent, since a compromised winch strap can slip free of the drum.\u003c\/p\u003e","brand":"CARGO CONTROL CENTER","offers":[{"title":"Default Title","offer_id":49295250227447,"sku":"WS230-CC","price":7.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/0246\/3479\/files\/winch-strap-2-in-x-30-ft_1_ab6becfe-f282-4c77-9aca-2dee7e3a4787.webp?v=1783040347"}],"url":"https:\/\/cargocontrolcenter.com\/collections\/winch-straps.oembed","provider":"CARGO CONTROL CENTER","version":"1.0","type":"link"}