4" x 30' Winch Strap with Chain Anchor — Flatbed Tie-Down, 5,400 lb WLL

A 4-inch winch strap with a chain anchor on the fixed end. The chain wraps around a beam, cross-member, or frame rail and hooks back on itself, so you can anchor to points where a flat or wire hook has nothing to grab. Thread the free end through the trailer winch and crank it down until the load holds steady at 5,400 lbs Working Load Limit.

The chain anchor runs 20 inches from a forged triangle link to a 3/8 inch Grade 70 grab hook, both finished in gold zinc chromate. Grade 70 is the transport-grade steel used for cargo-securement chain. The hook takes any link along the chain, so you set the length at the anchor and leave the winch to do the tensioning.

Use the chain anchor when you're securing to equipment frames or trailer points that a hook can't catch. Your trailer needs a mounted winch to tension the strap. Inspect the webbing, chain, and hook before every trip and retire the strap if the webbing is cut or frayed or the hardware is bent or cracked, since chain links wear at contact points over repeated use.